How to Make an N64 Shine Again

As an Amazon Associate we earn from qualifying purchases.

If your game doesn't piece of work, the Nintendo 64 game cartridges may be too dirty. Fortunately, you can quickly fix that past cleaning them, and you are in the right place if yous don't know how to go almost it. Let'southward run across how to clean the N64 cartridge.

Contents

• How To Clean N64 Cartridge
  • Step #1: Disassemble N64 Cartridge
  • Stride #ii: Make clean The N64 Cartridge
  • Step #3: Reassemble Your N64 Cartridge
• Frequently Asked Questions
  • How Exercise You Make clean The N64 Cartridge Circuit Board Effectively?
  • How Do You Clean The N64 Cartridge Pins?
  • What Should I Avoid When Cleaning The N64 Cartridge?
• Conclusion

How To Make clean N64 Cartridge

Game cartridges are prone to attracting dust, droppings, and lint because of their grooves and thus tin malfunction after prolonged employ and no maintenance. Before you lot clean the N64 cartridge, ensure you follow all procedures to disassemble it. Going incorrect at this phase could toll you the cartridge itself.

Step #1: Detach N64 Cartridge

This is the start step to help cleaning it efficiently, quickly, and thoroughly.

• Using a 3.8 mm Gamebit screwdriver, separate the cartridges and the panels to pause apart two parts of the one-time.
• Admission the circuit board by removing the shielding.

It's super essential to be delicate and follow the right procedure when disassembling the N64 cartridge.

Step #2: Clean The N64 Cartridge

One time yous detach it, start cleaning. You can do it in three different means.

Method #one: Effort An Air Squeegee

Even though there is a alert against it, information technology will work.

• Blow the length of your N64 cartridge slot using an air duster.
• Try and see if the game plays after that.

Don't be surprised if it doesn't work. That'southward because information technology is more of a maintenance procedure than a cleaning method.

Information technology removes dirt and germs that often harbor themselves in the insertion slot.

If y'all don't take an air duster, go ahead and use your rima oris to blow.

Even so, avert sending too much moisture while at it since it tin destroy the game in the long run.

Method #2: Use Booze

This method is more effective than the other one. Take hold of these tools to get started:

• Booze
• Cotton swabs

Once you lot accept them, follow these steps:

1. Damp the cotton swab with alcohol but ensure that you lot simply use a small amount.
2. Insert the damp cotton swab in the N64 cartridge insertion gap.
3. Use the cotton swab to scrub the interior of the N64 cartridge besides.
4. Swipe them forth with the copper contacts of the cartridge.
5. Continue replacing one cotton swab with the other until it remains clean despite swapping it in the N64 cartridge.
6. One time all dirt is out, let it dry for 5 to 10 minutes.
7. Endeavor the game to meet if information technology works.

Tips when using the method:

• Don't use too much alcohol when dampening the cotton fiber swab.
• Rectangular motion when wiping the copper contacts.
• Be business firm however careful during the entire cleaning procedure.
• Don't employ a hairdryer to dry out the cartridge.

Method #3: Use Metal Polish

This method is similar to that of using alcohol merely relatively constructive. The necessary tools are:

• Metal shine such as Brasso
• Q-tips Cotton swabs

One time you have them, follow these steps:

1. Add just two drops of the metal shine on your Q-tips cotton swab.
2. Insert the damp cotton wool swab in the N64 cartridge insertion gap.
3. Scrub the interior of the N64 cartridge using the cotton swab.
4. Ensure to run it through the copper contacts of the cartridge too.
5. Continue this procedure past replacing the cotton wool swab until one comes out make clean
6. Try the game to see if it works.

Tips when using this method:

• A pencil eraser tin can brand the process faster
• Later on, employ 1 dry Q-tip cotton to remove dirt, dust, and whatsoever other particles that may have built up.

Step #3: Reassemble Your N64 Cartridge

Once information technology is clean, this is how yous restore information technology:

• Return the metal shield and screw with a screwdriver to cover the pins and the circuit board.
• Put the metallic shielding dorsum to one-half of the cartridge.
• Once in, put the two cartridge halves back together.

This video will guide you deep clean your N64 cartridge.

Frequently Asked Questions

How Do You Clean The N64 Cartridge Circuit Board Finer?

To make clean the N64 cartridge circuit board, utilise a canteen of electronic grit remover to articulate debris and dust off the board. As you spray information technology, maintain a distance of 9 – 12 inches between the remover and the circuit lath.

How Practice You lot Clean The N64 Cartridge Pins?

To clean N64 cartridge pins, all you need is rubbing alcohol and a cotton wool swab. Damp the latter using the former and clean the pins thoroughly.

What Should I Avert When Cleaning The N64 Cartridge?

Yous should never utilise Windex when cleaning a N64 cartridge. This is because it volition leave deposits on the N64 cartridge contacts. Similarly, information technology likewise avoided when cleaning stained glass every bit Windex can exist too strong. Equally of import, don't apply sandpaper because it will destroy it.

Conclusion

You don't need to throw abroad your Nintendo game simply because it is not working.

Instead, clean information technology using the above methods, and don't forget that some are more effective than others.

Every bit y'all clean, heed the communication and don't ignore the tips. Never forget the dos and don'ts when cleaning an N64 cartridge, lest it does more harm than good.

norrisaisce2001.blogspot.com

Source: https://cleanerwiki.com/how-clean-n64-cartridge/

Share this post